Home > Products > Multicopter NINJA 400MR > Compatible Transmitter
NINJA400MR

RADIOS - Compatible Transmitter -

A JR XBus compatible radio is required.
If you are using JR XG6, XG8 and XG11, XBus compatible software is required. Please check your radio software version and please update as necessary.
For required software versions, please refer to the following explanations for each radio.

If you have purchased 88357 & 88371, a XBus compatible receiver is required.




XG6

Required software versions : 0001-0010 or later

Radio setup data Download

* After updated, please perform the following setup.
  1. Choose [SYSTEM LIST] on transmitter
  2. Choose [X.BUS] menu by using a dial, and press it. Then, [X.BUS FUNCTION] is displayed.
  3. Change BUS TYPE from INH to MODE.A.

XG8

Required software versions : 0001-0015 or later

Radio setup data Download

* After updated, please perform the following setup.
  1. Choose [SYSTEM LIST] on transmitter
  2. Choose [X.BUS] menu by using a dial, and press it. Then, [X.BUS FUNCTION] is displayed.
  3. Change BUS TYPE from INH to MODE.A.

XG11

Required software versions : 0002-0011 or later

Radio setup data Download

* After updated, please perform the following setup.
  1. Choose [SYSTEM LIST] on transmitter
  2. Choose [X.BUS] menu by using a dial, and press it. Then, [X.BUS FUNCTION] is displayed.
  3. Change BUS TYPE from INH to MODE.A.

XG11MV

all XBus compatible

Radio setup data Download

XG14

all XBus compatible

Radio setup data Download


* For improvement of the products, appearance or the specifications are subject to change without notice.

| Back To Top |


Last updated
2015.9.10